Servomex SERVOPRO 4900 User Manual

5.8
SELECT ANALOGUE
1.1 ASSIGNED
8
or
SELECT ANALOGUE
1.1 UNASSIGNED 8
L
> or ? to select another output then L
ENTER
or
L MEASURE to return to measurement
display
Table 5.6 Clearing an analogue output assignment
L MENU to obtain top level menu
CALIBRATE/SETUP
ALARMS/FAULTS
L < ENTER
SET ALARM/ASSIGN
DISPLAY/UTILITY
L < ENTER
ENTER PASSWORD
0000
To change the value of a digit
L > or ?
To change to another digit L = or <
When the number shown is correct L ENTER
RELAYS
ANALOGUE
L ? ENTER
SELECT ANALOGUE
1.1 ASSIGNED 8
L
> or ? to select the required previously
assigned output analogue output then
L
ENTER.
ANALOGUE ASSIGN
1.1 EDIT/CLEAR
L < ENTER to clear the assignment.
SELECT ANALOGUE
1.1 UNASSIGNED
8
L
MEASURE to return to measurement
display.

Servomex SERVOPRO 4900 Specifications

General

Brand	Servomex
Model	SERVOPRO 4900
Category	Analytical Instruments
Language	English