SEW-Eurodrive MOVI-C CONTROLLER UHX65A - MOVI-C CONTROLLER; Nameplate

3
Introduction
MOVI-C® CONTROLLER
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
13
3.2 MOVI-C
®
CONTROLLER
MOVI-C®
CONTROLL
ER
The MOVI-C
®
CONTROLLER in the performance class "progressive" is a motion and
logic controller for demanding automation tasks. The real-time operating system guar-
antees very short response times as well as a high-performance connection of system
buses from SEW‑EURODRIVE and standard fieldbuses. Demanding visualization
solutions can be realized via the Windows operating system that is running in parallel.
The MOVI-C
®
CONTROLLER "progressive" performance class is suitable for automat-
ing machines and cells for up to 16interpolating axes and 16auxiliary axes depending
on the application program. It is suitable as a module controller for complex motion
functions such as electronic cams and robotics, as well as for the complete automa-
tion of machines and systems.
3.2.1 Nameplate
The following graphic shows the nameplate of the MOVI-C
®
CONTROLLER as an ex-
ample:
D-76646 Bruchsal
Made in Germany
CONTROLLER
progressive
Type: UHX65A-R-04-N0
SO#: 01.1234567890.0047.18
Eingang / Input
U = DC24V
Status: 51 51 51 51 51
01 02 03 04 05
I (max) = DC1,3A
T = 0...+50°C
22884601355
3.2.2 Type code
The following table shows of the type code structure:
Example: UHX65A-R-04-N0
Product name UHX MOVI-C
®
CONTROLLER
Series 65 Progressive
Version A Version status A
Designs R
• 0 = No fieldbus interface
• R = With EtherNet/IP
TM
fieldbus interface, Modbus
TCP, and PROFINET IO for slave connection
Performance 04
• 01 = E3815 CPU (1 Core)
• 02 = E3825 CPU (2 Cores)
• 04 = E3845 CPU (4 Cores with TPM
1)
)
Additional option N0
• N0 = Retain memory available
1) Trusted Platform Module – Additional safety functions
28514688/EN – 02/2019