SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Applying MOVI-C devices to MOVISUITE

5
Startup
Configuration of the EtherCAT®/SBusPLUS stations
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
39
5.1.3 Applying MOVI-C
®
devices to MOVISUITE
®
The MOVI-C
®
devices are detected during the network scan.
Proceed as follows:
ü You started a network scan.
1. Apply the scanned devices to MOVISUITE
®
.
9007216181358219
2. If necessary, load the device data into the MOVISUITE
®
project. Confirm the mes-
sage stating that the device data has been successfully transferred.
ð The devices are displayed in one of the MOVISUITE
®
views. The display de-
pends on the view you used when closing MOVISUITE
®
for the last time:
ð The combined network and function view shows all connected devices detected
during the network scan.
25866597515
28514688/EN – 02/2019