SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Configuration and Startup with Windows 10 IoT Enterprise; Application examples - operation of the Windows operating system; Activating the Windows swap file

6
Configuration and startup with Windows 10 IoT Enterprise
Application examples – operation of the Windows operating system
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
45
Right mouse button
You can also simulate a right click via the on-screen keyboard. Use the following but-
ton of the on-screen keyboard.
6.5.3 Activating the Windows swap file
For a high workload on the MOVI-C
®
CONTROLLER (e.g. during startup of a visualiz-
ation), it is beneficial to activate the Windows swap file. Due to the Windows swap file,
there is more RAM available for applications.
Once the application is started up successfully, deactivate the Windows swap file. By
deactivating the Windows swap file, you make sure that the system does not perform
unnecessary write operations on the CFast OMW memory card.
INFORMATION
Switching off the MOVI-C
®
CONTROLLER, make sure that the system controlled by
the control section is in a safe state.
Proceed as follows:
1. Open the start menu and type "Control Panel" into the search field.
2. In the result list, click on the app entry [Control Panel].
3. Select the "System and Security" submenu and click on "System".
ð The "View basic information about your computer" window opens.
4. Select "Advanced system settings" on the left.
27514137867
ð The "System Properties" window opens.
28514688/EN – 02/2019