SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Installation Notes; Installation accessories; System bus cable

4
Installation notes
Installation accessories
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
18
4 Installation notes
4.1 Installation accessories
The following accessories can be ordered using the specific part number:
4.1.1 System bus cable
Cable for connecting MOVI-C
®
CONTROLLER and other automation components
(such as MOVIDRIVE
®
modular/system application inverters)
Designation Length Connector Part number
4-pole system bus cable, sys-
tem bus EtherCAT
®
/SBus
PLUS
• 0.75m
• 1.5m
• 3m
• 5m
• 10m
2 × RJ45
• 18167039
• 18179975
• 18167047
• 18179983
• 18179991
For further information, refer to the chapter "System bus cable"(→228).
4.1.2 Accessories cable routing
Accessories for securing and stabilizing cable routing and the connections to the
MOVI-C
®
CONTROLLER terminals.
Designation Part number
Accessories cable routing
In detail:
• 1×cable retainer (see figure)
• 2×screw
• 6×cable tie
28260708
For information on assembly, refer to chapter "Accessories cable routing"(→230).
28514688/EN – 02/2019