SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Installing options and accessories; Accessories cable routing

4
Installation notes
Installing options and accessories
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
30
4.4 Installing options and accessories
4.4.1 Accessories cable routing
Installing cable retainers
1. Loosen the screws [2] of the MOVI-C
®
CONTROLLER.
24 V
L1
L2
L3
X90
X80
USB1
USB2
USB3
XM2
XM1
DP
X5
X30
X81
X40
X41
L41
L40
[1]
[2]
24 V
L1
L2
L3
X90
X80
USB1
USB2
USB3
XM2
XM1
DP
X5
X30
X81
X40
X41
L41
L40
28203565963
2. Insert the cable retainer [1] to the MOVI-C
®
CONTROLLER as shown in the figure.
3. Insert the screws contained in the "Accessories cable routing"(→218) instead of
the removed screws [2] and tighten the screws.
28514688/EN – 02/2019