6
Configuration and startup with Windows 10 IoT Enterprise
General information
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
42
6 Configuration and startup with Windows 10 IoT Enterprise
6.1 General information
INFORMATION
• The operating system Windows 10 IoT Enterprise on the OMW memory card is
only available in English.
• If you want to use a Windows remote desktop connection, you have to use a user
password.
6.2 Initial start of the Windows operating system after delivery
The initial start process of the Windows 10 IoT Enterprise operating system includes
several setup screens that allow you to adjust the operating system to your require-
ments. Among other points, you will be prompted to confirm the system time and set
the user name. The conventional Windows dialogs allow you to adjust, for example,
the currency and date format to your region.
6.3 Switch-off and reboot behavior of the MOVI-C® CONTROLLER
If the MOVI-C
®
CONTROLLER is operated with the OMW CFast memory card and the
OMH CFast memory card, it represents a combined device. The
MOVI-C
®
CONTROLLER comprises a control section as well as a Windows section. In
this case, the Windows switch-off and reboot behavior is different to normal desktop
PCs.
• Windows reboot
Windows reboots. The control section keeps running as normal without a reboot.
• Windows shutdown
Windows and the control section are shut down. To switch the system back on,
switch the voltage supply of the MOVI-C
®
CONTROLLER off and back on.
INFORMATION
SEW‑EURODRIVE recommends that you should shut down Windows 10IoT Enter-
prise properly before you switch off the supply voltage of the
MOVI-C
®
CONTROLLER.
6.4 Creating a data backup
You can use the tools provided by Windows create a backup image of the OMW
CFast memory card. SEW‑EURODRIVE strongly recommends creating a data
backup.
28514688/EN – 02/2019
To Next Page
Loading...
