SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Configuration and Startup with Windows 10 IoT Enterprise; Application examples - operation of the Windows operating system

6
Configuration and startup with Windows 10 IoT Enterprise
Application examples – operation of the Windows operating system
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
48
6.5.4 Setting an automatic system startup
After startup, you can configure the system to boot automatically e.g. to directly start
the with a previously generated visualization.
Proceed as follows:
1. Open the start menu and type "Run" into the search field.
2. In the result list, click on the app entry [Run].
ð The "Run" window is displayed.
3. In the "Open" edit box, enter the command "control userpasswords2" and
confirm with [OK].
27514433803
ð The "User Accounts" window opens.
4. Deactivate the "Users must enter a user name and password to use this computer"
check box for the user who is planned to log in automatically.
27514580363
5. Confirm deactivation of the option with [OK].
ð You are prompted to enter the user password.
6. Enter your password and then confirm with [OK].
7. To start a visualization automatically, create a shortcut in the "Startup" section in
the Windows start menu.
28514688/EN – 02/2019