SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Copying a firmware image to the OMH memory card

8
Procedure while updating firmware
Copying a firmware image to the OMH memory card
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
51
8.2 Copying a firmware image to the OMH memory card
1. Remove the OMH memory card from the MOVI‑C
®
CONTROLLER. The insertion
mechanism of the OMH memory card is described in the chapter "Inserting
memory cards"(→229).
2. To read the data stored on the OMH memory card, insert the card in a card reader
connected to your PC. You can also used a suitable interface of your PC.
3. Use the file explorer on your PC to open the content of the OMH memory card.
28166114571
INFORMATION
The "licenses" directory on the OMH memory card contains your license files. To en-
sure that the purchased licenses remain valid, the directory must be stored onto the
OMH memory card again after the firmware update.
4. Copy the "licenses" directory with your licenses onto your PC.
5. Delete all files on the OMH memory card.
6. Unzip the zip archive of the required firmware image onto the OMH memory card.
For more information on the export, refer to chapter "Exporting a firmware im-
age"(→250).
7. Copy the "license" directory stored on your PC to the OMH memory card.
INFORMATION
After you deleted it from your OMH memory card, you can restore the "licenses" dir-
ectory using the MOVISUITE
®
License Manager. For this purpose, carry out the fol-
lowing steps:
ü Engineering PC and MOVI-C
®
CONTROLLER are connected.
ü The engineering PC is connected to the Internet.
• Insert the OMH memory card into the MOVI‑C
®
CONTROLLER. See chapter "In-
serting memory cards"(→229).
• Open the License Manager via the context menu of the MOVI-C
®
CONTROLLER
in the MOVISUITE
®
menu "Tools".
• Click on [Transfer licenses to the MOVIC
®
CONTROLLER].
ð The firmware update was completed. You can create a new MOVISUITE
®
project.
28514688/EN – 02/2019