SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Introduction; MOVI-C CONTROLLER; OMW CFast memory card

3
Introduction
MOVI-C® CONTROLLER
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
17
3.2.5 OMH CFast memory cards
The OMH CFast memory card (card for UHX65A: OMH65A-C1) is required for opera-
tion of the MOVI‑C
®
CONTROLLER and contains the firmware, the IEC program and
user data (e.g. recipes). You can use the memory card for data backup and automatic
parameterization in the event of an axis replacement. The CFast memory card is
plugged into the XM1 card slot of the MOVI‑C
®
CONTROLLER. See chapter "Inserting
memory card"(→229).
3.2.6 OMW CFast memory card
The OMW CFast memory card extends the MOVI‑C
®
CONTROLLER with a Windows
operating system and can be used e.g. for plant visualization. The OMW CFast
memory card is plugged into the card slot XM2 of the MOVI‑C
®
CONTROLLER. See
chapter "Inserting memory cards"(→229).
The memory card is available in various designs. The various features lead to the fol-
lowing structure of the type code of the memory card:
Example: OMW62A-2-C2
Product name OM MOVI-C
®
CONTROLLER memory card
W GPOS
Design 62
• 62 = 32GB
• 63 = 64GB
Version A Version status A
Technology 2
• 0 = SLC (Single-Level Cell)70°C
– Service life ≈100000 – 300000 erase cycles
– Memory card for applications with large amounts of
data.
• 2 = MLC (Multi-Level Cell)85°C
– Service life: ≈10000 erase cycles
– Alternative for applications with smaller amounts of
data.
Image C2
• C2 = Operating system Windows 10 IoT Enterprise
(EN)
For a Windows operating system, the MOVI-C
®
CONTROLLER with the type designa-
tion UHX65A-R-04, for example, makes the following hardware available:
• Intel Atom E3845 (Windows 10 IoT Enterprise uses 2 kernels)
• 4GB RAM
• 1 ×Ethernet 10MBaud/100MBaud/1000MBaud (X90)
• 1 ×virtual Ethernet to the control section
• 3 ×USB 2.0 (USB 1, 2, 3)
• 1 ×DisplayPort
28514688/EN – 02/2019