SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Configuration and Startup with Windows 10 IoT Enterprise; Application examples - operation of the Windows operating system; Setting a remote desktop connection

6
Configuration and startup with Windows 10 IoT Enterprise
Application examples – operation of the Windows operating system
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
43
6.5 Application examples – operation of the Windows operating system
Various typical application cases for the operation of the Windows section are des-
cribed below
INFORMATION
• SEW‑EURODRIVE provides the non-exhaustive application examples as a gen-
eral reference and does not assume corresponding liability.
• SEW‑EURODRIVE does not offer support for setting up your Windows system.
6.5.1 Setting a remote desktop connection
You can use a remote desktop connection for remote maintenance purposes.
INFORMATION
Note that remote maintenance does not allow you to monitor the state of the system
on-site.
Proceed as follows:
ü There is a network connection between your PC and the Windows section of the
MOVI-C
®
CONTROLLER.
ü You are working on the MOVI-C
®
CONTROLLER with a password-protected user
account.
1. Open the start menu and type "Control Panel" into the search field.
2. In the result list, click on the app entry [Control Panel].
3. Select the "System and Security" submenu and then call up the "Allow remote ac-
cess" menu in the "System" group.
27196460171
28514688/EN – 02/2019