SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Scanning the network for devices

5
Startup
Configuration of the EtherCAT®/SBusPLUS stations
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
38
5.1.2 Scanning the network for devices
Proceed as follows:
ü The connection between the engineering PC and MOVI-C
®
CONTROLLER is es-
tablished via the engineering interface.
1. Start MOVISUITE
®
.
2. Create a new MOVISUITE
®
project from a network scan.
9007216181236875
3. Select the network type (Ethernet) and activate the configured adapter (LAN con-
nection). Apply the settings and perform the network scan.
18014415924706187
28514688/EN – 02/2019