SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Startup; Applying MOVI-C devices to MOVISUITE

5
Startup
Configuration of the EtherCAT®/SBusPLUS stations
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
40
ð The function view has 2 views. The tree view shows an overview of the entire
project. The circle view shows the current node as a large circle in the center of
the working area.
25866477195
3. To switch between the MOVISUITE
®
views, click the "Network" tab.
4. Enter a name for the MOVI‑C
®
 CONTROLLER. The device is shown in the
MOVISUITE
®
project under this name.
25866582283
28514688/EN – 02/2019