SEW-Eurodrive MOVI-C CONTROLLER UHX65A - Technical data

10
Technical data
Technical data
Manual – MOVI‑C
®
CONTROLLER progressiveUHX65A
54
10.2 Technical data
MOVI‑C
®
CONTROLLER progressive UHX65A
Electrical supply
• Power consumption: P
max
= 30W
• Supply voltage U = DC24V in accordance withIEC61131‑2
• Current consumption I
max
=1.3A
(with DC24V supply voltage)
• The MOVI-C
®
CONTROLLER has to be supplied by an ex-
ternal voltage source.
Memory
• Retain data: 32kB
• Retain persistent: 2kB
• Program memory: 64MB for application, including IEC librar-
ies
• Data memory: 64MB
CFast memory card Windows section
(card slot XM2):
OMW62A (32GB)
OMW63A (64GB)
• Software package:
– Operating system Windows 10 IoT Enterprise (-C2)
CFast memory card control section
(Card slot XM1):
OMH65A-C1
• PC-readable
• Contents:
– Firmware
– IEC program
– Application data
• 2GB memory
X5
DC24V supply voltage connection (2-pin
connection)
Connection type: Plug connector
• 1core: 0.25mm
2
–2.5mm
2
• 2cores: 0.5mm
2
–1.5mm
2
(TWIN‑AEH
1)
)
X30
EtherCAT
®
/SBus
PLUS
interface
(RJ45 socket)
Fast system bus SBus
PLUS
based on EtherCAT
®
for master con-
nection
X80, X82
Engineering interface
(RJ45 socket)
• TCP/IP
• Possible connections: Engineering PC, visualization, other
controller
• Engineering for all SEW‑EURODRIVE components connec-
ted to the MOVI-C
®
CONTROLLER can be performed via the
MOVI-C
®
CONTROLLER.
X90 Engineering interface for the Windows section
USB1-3 USB interfaces assigned to the Windows operating system
1) AEH: Conductor end sleeve
28514688/EN – 02/2019