Shake! 350 - Test Navi

9.5.2 Run Button Operation: Test Navi
-21-
With this function, before actually running, the route to
be followed may be checked.
After setting a goal point and start point, touch the
Test button on the map to start a theoretical Test
Navi.
Goal and start point flags must be set beforehand.
Goal Flag
Start Flag Way Flag
④Test Navi
Flags to Set:
Computed with preferenc
e
for expressways,
national highways,
and local roads,
in that order.
When the direct
distance is over 300
km, in some cases
toll roads will be used.
Calculate passing near
waypoint way flags
A route search is carried out and the route to be driven is decided.
1) Select route search parameters using the “Yes” and “No” buttons.
(Selected buttons have red letters.)
2) After parameters have been selected, press OK to begin.
3) Test Navi does not include narrow streets in route searches.
To compute
through waypoints,
set a way flag
beforehand.