Shake! 350 - 6 Mounting in Vehicle

6. Mounting in Vehicle
-6-
① Mount suction cap A, and lock the mounting surface with lever B. Fit
the cigar lighter power cable behind the device holder as shown in the
figure.
② Move the device holder on the back hooks of the vehicle mount stand
until it clicks and stops to fix. Pull out the GPS antenna on the main body.
③ Fix the main body to the device holder, and adjust the angle so it is
easy to view.
④ Finally, attach the cigar lighter
power plug to the main body.
Notes:
• In places where the suction cap does
not attach, use the round tray to
mount.
• Ensure that there is no dirt on the
mounting surface.
• When mounting, choose a location such that the
driver’s field of view will not be obstructed.
• In vehicles in which the cigar lighter socket power
remains on even when the engine is off, remove
the power plug when the engine is stopped.
Please note that if you do not mount in this sequence, the power plug
may come off easily.