Doc# E145701 TOC - 4
Table of Contents
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
6.2.5.3: Configuring PT Setting 6-11
6.2.5.4: Configuring Connection Setting 6-13
6.2.5.5: Configuring Communication Port Setting 6-13
6.2.6: Using Operating Mode 6-15
6.3: Understanding the % of Load Bar 6-16
6.4: Performing Watt-Hour Accuracy Testing (Verification) 6-17
6.5: Programming the Transducer or Meter Using Software 6-19
6.5.1: Accessing the Transducer/Meter in Default
Communication Mode (RS485 Communication) 6-19
6.5.2: Connecting to the Transducer/Meter through
Communicator EXT
TM
Software 6-20
6.5.3: Device Profile Settings 6-24
7: Using the Shark® 100B Meter 7-1
7.1: Introduction 7-1
7.1.1: About BACnet 7-1
7.2: Shark® 100B meter’s BACnet Objects 7-2
7.3: Configuring the Shark® 100B Meter 7-5
7.4: Using the Shark® 100B Meter’s Web Interface 7-12
7.5: Using the Shark® 100B in a BACnet Application 7-18
A: Shark® 100/50 Meter Navigation Maps A-1
A.1: Introduction A-1
A.2: Navigation Maps (Sheets 1 to 4) A-1
B: Shark® 100 and 50 Meter Modbus Map B-1
B.1: Introduction B-1
To Next Page
Loading...
