Need help?Do you have a question about the Shark MP200 and is the answer not in the manual?
General| Brand | Shark |
|---|---|
| Model | MP200 |
| Category | Measuring Instruments |
| Language | English |
Describes the MP200 as a multi-port, high-density power and energy meter for various environments.
Details the universal voltage input range and current input options (5A or 1A secondary).
Explains how to order the MP200 unit by specifying circuit configuration, frequency, current class, V-Switch key, and communication.
Explains V-Switch key technology for field upgrades without removing the unit from service.
Lists the measured values provided by the MP200 system, available instantaneously, averaged, maximum, and minimum.
Lists detailed specifications for Power Supply, Voltage Inputs, and Current Inputs, including ranges and connections.
Lists various UL, IEC, ANSI, EN, and CE compliance standards and certifications met by the MP200 system.
Details the MP200 metering system's clock accuracy and measurement accuracy for various parameters.
Details how to securely mount the unit, recommended tools, and environmental considerations for installation.
Provides instructions on how to safely clean the MP200 unit, emphasizing disconnecting power first.
Emphasizes that installation must be by qualified personnel, highlights dangerous voltages, and prohibits certain uses.
Explains how to connect the MP200 unit's ground terminal directly to the installation's protective earth ground.
Details how voltage inputs are connected via wire connectors and recommends fuse usage.
Recommends specific fuse types and ratings for voltage leads and power supply connections.
Covers cable rating requirements for current inputs and CT mounting recommendations.
Lists the available electrical connection diagrams for various service types and configurations.
Details the communication ports, protocols (Modbus ASCII/RTU/TCP), and options like Ethernet/WiFi.
Explains Com 1's capabilities for RS485, Ethernet, and WiFi communication, supporting Modbus protocols.
Describes RS485 connectivity for multiple MP200 units to a PC, detailing cable length limits and conversion requirements.
Explains how to use the Unicom 2500 for RS485/RS232 and Fiber Optic/RS232 conversion for PC communication.
Details the MP200 unit's USB port for communication as a virtual serial channel, compatible with standard USB cables.
Explains Com 3's support for RS485 communication, usable for the optional display.
To Next Page
