Doc# E166703 10-48
10: Using the Optional Display
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
10.10: Compliance and Standards
• ANSI/UL 61010-1 / ANSI/UL 61010-2-201 for Programmable Controllers
• CSA C22.2 no. 142 for Industrial Control Equipment
• IEC 61010-1/IEC 610010-2-201 for Programmable Controllers
• ANSI/ISA 12.12.01 and CSA C22.2 no. 213 for Electrical Equipment for Use in Class
I, Division 2 Groups A, B, C and D Hazardous (classified) Locations Hazardous Sub-
stances
• WEEE, Directive 2012/19/EU
• RoHS, Directive 2011/65/EU and 2015/863/EU
• RoHS China, Standard (GB/T 26572)
UL Conditions of Acceptability and Handling Cautions for Unit:
The GP unit is suitable for use in hazardous locations in accordance with Class I,
Division 2 Groups A, B, C and D standards. All relevant local, state, and regional
codes must be followed.
CE Markings:
This product conforms to the necessary requirements of the following Directives for
applying the CE label:
• Directive 2014/35/EU (Low voltage)
• Directive 2014/30/EU (EMC)
This conformity is based on compliance with IEC 61131-2.
To Next Page
Loading...
Need help?
General
