Doc# E166703 2-1
2: MP200 Metering System Overview and Specifications
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
2: MP200 Metering System Overview and
Specifications
2.1: Shark® Series MP200 Metering System Overview
The Shark® Series MP200 unit is
a multi-port, high-density power
and energy metering system,
designed to be used in high-den-
sity metering environments such
as data centers, commercial high-
rise complexes, high-density
power distribution panels, and
branch circuits. The MP200 meter-
ing system provides 8 three phase
or 24 single phase meters served
by one central processing unit,
which delivers the measured data in multiple formats via RS485 serial communica-
tion, USB port communication, RJ45 Ethernet, or 802.11 WiFi Ethernet options. The
MP200 metering system also has data logging and load profiling capability to provide
historical data analysis.
The MP200 unit can be ordered as either an MP200-Y for three phase Wye/Delta sys-
tems or as an MP200-S for single phase systems. The MP200 unit is designed to be a
cost-effective instrument for high density metering. It is important to note that for
this design to function properly, all loads must be powered from a common voltage
(or three phase voltage) set.
Figure 2.1: Shark® MP200 Metering System
To Next Page
Loading...
Need help?
General
