Shark MP200 - 2.1.2: Ordering Information; 2.1.3: V-SwitchTM Key Technology

Doc# E166703 2-4
2: MP200 Metering System Overview and Specifications
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
2.1.2: Ordering Information
*See Section 2.1.3 for more information and instructions on obtaining a V-Switch
TM
key.
Example:
MP200-Y-60-10-V2-X
(MP200 metering system with three phase circuit configuration, 60 Hz Frequency, 10
A Secondary, V-2 V-Switch
TM
key, and RS485-only communication.)
NOTE on Frequency: It is important to specify the frequency to insure the highest
possible calibration accuracy from the factory.
2.1.3: V-Switch
TM
Key Technology
The MP200 metering system is equipped with V-Switch
TM
key technology, a virtual
firmware-based switch that lets you enable features through software communication.
V-Switch
TM
key technology allows feature upgrades after installation without removal
from service.
Available V-Switch
TM
key upgrades are as follows:
• V-Switch
TM
key 1 (V1): Multifunction measurement
• V-Switch
TM
key 2 (V2): Multifunction measurement and 2 MegaBytes* for data
logging
Model Circuit
Configuration
Frequency Current
Class
Vswitch
TM
Key Pack*
Com
MP200
-Y
Three Phase
-60
60 Hz
-10
10 A
Secondary
-V1
Transducer
-X
RS485
Only
-S
Single Phase
-50
50 Hz
-2
2 A
Secondary
-V2
Basic
Logger
-WIFI
Ethernet
and
WIFI
-V3
Advanced
Logger