Doc# E166703 10-21
10: Using the Optional Display
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
10.6.2: RJ45 Ethernet Configuration
Ethernet communication is set up between the MP200 unit’s Com 1 RJ45 port and the
MDSN/MDLN’s RJ45 port.
Follow this procedure:
1. Set the MP200 unit’s Com1 switch to Ethernet/WiFi.
Figure 10.12: Com 1 Switch Set to Ethernet/WiFi
2. Configure the MP200 unit:
a. From the MP200 unit’s Device Profile (see Chapter 5), open the Communi-
cations screen.
Com 1 Switch
To Next Page
Loading...
