Doc# E166703 10-22
10: Using the Optional Display
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
b. Make sure the Com1 settings are the same as those shown in the screen
below. If they are not, click the Default for Ethernet button to bring these
settings into the Com 1 fields.
c. If you changed the Com 1 settings to make them match those shown
above, click Update Device to send the new settings to the meter. If you
did not need to make any changes, click Exit to close the Device Profile
screen.
To Next Page
Loading...
