Sharp 60X50H - Manual picture settings; OPC (Optical Picture Control) setting

Press
MENU
and the MENU screen displays.
1
Press
b
/
c
/
d
to select “Picture”.
3
Press
a
/
b
to select the desired menu item.
Press
ENTER
to proceed if necessary.
4
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER
if necessary.
5
NOTE
• For resetting all adjustment items to factory preset values,
press
a
/
b
to select “Reset”, press
ENTER
, press
a
/
b
to
select “Yes”, and then press
ENTER
.
• When “Backlight” is adjusted, “OPC” is set to “Off”.
Press
c
/
d
to select “Setup”.
2
NOTE
• When “High” or “Low” in “3D brightness boost” is selected,
“OPC”, “Backlight” and “Range of OPC” are not available.
• The “3D brightness boost” is not available for 2D mode.
• The “3D brightness boost” items can be saved for every
3D “AV mode” item (“STANDARD (3D)”, “MOVIE (3D)” and
“GAME (3D)”.)
37
w
OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
Picture adjustment
You can adjust the picture to your preference.
Follow the steps to adjust the picture.
Watching TV
SetupCH list
Menu
Picture
:Exit:Enter:Select
Backlight
AV mode
OPC
[Off]
[STANDARD]
STANDARD
-16 +16+3
Dynamic highlight
[High]
Manual picture settings
Selected item
c
button
d
button
OPC Sets whether or not the screen brightness
is automatically adjusted according to
the lighting condition in the room. (OPC
setting: See this page.)
Backlight The screen dims
The screen brightens
3D brightness
boost
Refer to page 55 for details.
Contrast For less contrast For more contrast
Brightness For less brightness
For more brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones become
purplish
Skin tones become
greenish
Sharpness For less sharpness
For more sharpness
Advanced For fi ner picture adjustments. (See pages 38
to 39.)
Reset Resets all picture adjustment items to the
factory preset values.
Selected item Description
Off
The brightness is fi xed at the value set in
“Backlight” (See this page).
On
Automatically adjusts
On: Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
Using “OPC” on the menu screen
You can also select “OPC” on the remote control
unit.
w Dynamic highlight
This function adjusts the LED backlight according to the
brightness of the divided blocks in the displayed image.
Selected item Description
High Detects bright sections included in
images and shows the brightness in
four levels (High, Mid, Low, Dimmer) by
performing accurate control of the images
and backlight.
Middle
Low
Dimmer
Off No adjustment
OPC
indicatorOPC sensor
60X50H_en_ID5.indd 3760X50H_en_ID5.indd 37 2011-6-13 17:20:052011-6-13 17:20:05