Sharp 60X50H - Labelling input sources; Skipping an input; Colour system settings

59
You can assign each input source a label as you
prefer.
NOTE
• You cannot change labels if the input source is “A-TV”, “D-
TV”, “USB media” or “Home network”.
Press
TV/VIDEO
to select the desired input
source.
1
Press
MENU
and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press
a
/
b
to select “Input label”, and then
press
ENTER
.
6
Labelling input sources
CH list
Menu
INPUT
:Exit:Enter
HDMI2
HDMI1
HDMI3
HDMI4
INPUT5
DVD
INPUT7
PC
Not switchable
Switchable
Switchable
Switchable
Switchable
Switchable
Switchable
Switchable
Link
operation
Repeat the above until the name is fully spelt
out, and then press
MENU
.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select “Done”.
(Example)
8
Select each character of the new name for the
channel with using the software keyboard.
(See page 26.)
7
Press
b
/
c
/
d
to select “Option”.
4
Press
a
/
b
to select “Terminal setting”, and
then press
ENTER
.
5
Settings when using external devices
Press
MENU
and the MENU screen displays.
1
Press
b
/
c
/
d
to select “Option”.
3
Press
a
/
b
to select “Colour system”, and
then press
ENTER
.
4
Press
a
/
b
to select a compatible video signal
system of your equipment, and then press
ENTER
.
5
Auto
PAL
SECAM
NTSC3.58
NTSC4.43
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• Factory preset value is “Auto”.
•
If “Auto” is selected, colour system for input signal is automatically set. If an image
does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).
• You can choose from “Auto”, “PAL”, “SECAM”, “NTSC3.58” and
“NTSC4.43” in the “A-TV” mode.
•
“Colour system” is selectable only when inputting an composite signal.
Colour system settings
Press c/d to select “Setup”.
2
SetupCH list
Menu
:Back
INPUT5
HDMI4
Input skip
ȉHUPLQDOVHWWLQJ
[No]
HDMI1
[No]
[No]
HDMI2
Skip input selection
Yes No
This setting allows you to skip an input on the “Input skip” menu.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press
a
/
b
to select “Input skip”, and then
press ENTER.
5
Press
a
/
b
to select the Input you wish to
skip.
6
Press
c
/
d
to select “Yes”.
7
Press MENU to exit.
8
Skipping an input
Press
b
/
c
/
d
to select “Option”.
3
Press
a
/
b
to select “Terminal setting”, and
then press ENTER.
4
NOTE
• When you select "ATV", "DTV", the skip function works only
when using the INPUT button on the TV.
60X50H_en_ID5.indd 5960X50H_en_ID5.indd 59 2011-6-13 17:20:132011-6-13 17:20:13