Selecting channel key
Using genre info
On Off
Setting auto power on by AQUOS
LINK
AQUOS LINK
AQUOS LINK connection
First connect the AQUOS LINK-compatible audio system or an AQUOS BD player that supports the HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, turn on the power of the TV with all relevant device’s
power turned on. Change the external input source by pressing
TV/VIDEO
, select the appropriate input source and verify the
audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
Connecting an AQUOS BD player via the AQUOS LINK-
compatible audio system
Connecting an AQUOS BD
player only
AQUOS LINK setup
Press
MENU
and the MENU screen displays.
1
Press
a
/
b
to select “AQUOS LINK setup”,
and then press
ENTER
.
3
AQUOS LINK auto power on
If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Press
a
/
b
to select “Auto power on”.
5
Press
c
/
d
to select “On”.
4
Press
MENU
to exit.
6
NOTE
• The factory default for this item is “Off”.
• For “Auto power on”, go to “Setup”
s
“Option”
s
“AQUOS
LINK setup” in the menu screen.
Press
MENU
and the MENU screen displays.
1
Press
a
/
b
to select “AQUOS LINK setup”
and then press
ENTER
.
3
AQUOS LINK control
Press
a
/
b
to select “AQUOS LINK control”.
4
Press
c
/
d
to select “On”.
5
NOTE
• For “AQUOS LINK control”, go to “Setup”
s
“Option”
s
“AQUOS LINK setup” in the menu screen.
Press
c
/
d
to select “Link operation”.
2
Press
c
/
d
to select “Link operation”.
2
Optical fi bre cable
(commercially
available)
HDMI-certifi ed cable
HDMI-certifi ed
cable
HDMI-certifi ed cable
AQUOS BD player AQUOS LINK-compatible
audio system
AQUOS BD player
60X50H_en_ID5.indd 6260X50H_en_ID5.indd 62 2011-6-13 17:20:132011-6-13 17:20:13
To Next Page
Loading...
