Sharp 60X50H - Connecting a PC; Analogue connection; HDMI connection; Audio select for connecting a PC

66
ANALOGUE
RGB
AUDIO
(L/R)
Connecting a PC
Use the PC terminals to connect a PC.
Signal names for 15-pin mini D-sub connector
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No.
5
is not used for inputting the signal.
15
14
13
12
9
11
10
8
7
6
5
4 3
2
1
Pin No. Signal name Pin No. Signal name Pin No. Signal name
R GND (Ground) Not connected
G GND (Ground) SDA
B GND (Ground) HD
Not connected +5V VD
CSYNC GND (Ground) SCL
Analogue connection
PC
Ø 3.5 mm stereo
minijack cable
(Commercially
available)
RGB cable
(Commercially
available)
HDMI connection
PC
TV
PC
TV
HDMI 1, 2, 3, 4
HDMI 2
HDMI-certified cable
(commercially available)
ø 3.5 mm stereo minijack cable*
DVI/HDMI cable
(commercially available)
Audio select for connecting a PC
When using the PC terminal, you must select which
terminal uses the AUDIO (R/L) jack for analogue audio
input.
Go to “MENU”
s
“Setup”
s
“Option”
s
“Terminal
setting”
s
“Audio select”.
Selected item Description
HDMI (Digital) When connecting devices with RGB
cable to the PC terminal, display
images without audio.
HDMI+Analogue When connecting a PC to the PC
terminal, and inputting analogue audio
signals from the AUDIO IN terminal.
NOTE
* The analogue audio input is available only for HDMI 2/PC.
• Some PC may not be displayed properly under HDMI
connection.
60X50H_en_ID5.indd 6660X50H_en_ID5.indd 66 2011-6-13 17:20:162011-6-13 17:20:16