43
Watching TV
A-TV (Analogue TV)/D-TV (Digital TV) buttons
A-TV (Analogue TV):
Press to switch to analogue TV
mode. After switching from digital TV or external input
mode to analogue TV mode, the TV jumps to the most
recently viewed analogue channel.
D-TV (Digital TV):
Press to switch to digital TV
mode. After switching from analogue TV or external
input mode to digital TV mode, the TV jumps to the
most recently viewed digital TV channel.
When you watch the TV for the fi rst time
When the TV powers on for the fi rst time after
purchase, perform the auto installation.
A-TV (Analogue TV)
You can run the auto installation to set channels
automatically.
To watch the analogue TV, select “Auto
installation” from “Setup” menu. (See page 22.)
1
D-TV (Digital TV)
You can run the auto installation to set channels
automatically.
After setting the channels, you can select a
channel using
CH
r
/
s
or
0
-
9
on the remote
control unit. (See page 23.)
2
To watch D-TV broadcasts, select “Digital
Search” from “Auto installation” menu. (See
page 20.)
1
After setting the channels, you can select a
channel using
CH
r
/
s
or
0
-
9
on the remote
control unit. (See page 23.)
2
Use the following buttons on the remote control to
operate the menu.
EFFECT BOOST
SURROUND
3D
TEXT
EFFE
To Next Page
Loading...
