Why are images printing diagonally on my Sharp DX-C200 Printer?
If images are printing diagonally on the pages from your Sharp Printer, adjust the paper guides to remove any gaps between the paper and the guides.
How to align copies from the exposure glass on my Sharp DX-C200?
When copying from the exposure glass on your Sharp Printer, place the original copy side down, making sure that it is aligned to the rear left corner and pressed flat against the exposure glass.
Why does the paper get wrinkles when printing with my Sharp Printer?
If paper gets wrinkles when printing with your Sharp Printer: * Use paper that has been stored properly, as damp paper can cause wrinkles. * Ensure the paper isn't too thin. * Adjust the paper guides to remove any gaps between the paper and the guides.
Why do faxes sent from my Sharp DX-C200 Printer appear spotty or dirty when received?
If faxes sent from your Sharp Printer appear spotty or dirty when received: * Clean the exposure glass or ADF. * Before placing originals on the exposure glass, make sure that ink or correction fluid is dry.
Why is the scanned image distorted or out of position on my Sharp DX-C200 Printer?
If the scanned image is distorted or out of position on your Sharp Printer, it's possible that the original was moved during scanning. Ensure the original remains still during the scanning process.
What does 'Check Paper Type' mean on my Sharp Printer?
The 'Check Paper Type' message on your Sharp Printer means that the paper type set for the document differs from the type of the paper in the indicated tray. Press [FormFeed] to begin printing, or press [JobReset] to cancel the job.
Why can't my Sharp Printer receive faxes when it can send them?
If your Sharp Printer can send but not receive faxes: * Replace the print cartridge if it is empty. * Load paper in the paper tray if it is empty. * If fax reception mode is FAX/TEL Manual mode, you must receive the fax manually.
Why is my Sharp DX-C200 Printer feeding multiple sheets of paper?
If your Sharp Printer is feeding multiple sheets of paper at one time, try the following: * Fan the paper well before loading, and ensure the edges are even. * Make sure the paper guides are in the right position. * Use supported types of paper. * Load paper only as high as the upper limit markings on the paper guide. * Ensure the friction pad, paper feed roller, or registration roller is clean. * Only add paper when there is none left in the tray.
Why is the photocopied paper from my Sharp Printer dirty?
If the photocopied paper from your Sharp Printer is dirty, consider the following: * Adjust the image density, as it may be too high. * Avoid touching printed surfaces immediately after copying, and remove freshly printed sheets one by one. * Ensure the exposure glass or ADF is clean. * Before placing originals on the exposure glass, make sure that toner or correction fluid is dry.
How do I lighten or darken copies on my Sharp Printer?
If the copied pages from your Sharp Printer are too dark or too light, you can adjust the image density.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Technology | Laser |
| Print Speed | 20 ppm |
| Print Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed | 20 cpm |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Scanner Type | Flatbed |
| Paper Size | A4 |
To Next Page
