Why is the toner powdery on prints from my Sharp DX-C200 Printer?
If the toner is powdery and comes away from the paper, or the printed image has a matte appearance on your Sharp Printer, check if the fusing unit levers are properly set. Pull up the fusing unit levers.
How to prevent printed envelopes from creasing on my Sharp Printer?
To prevent printed envelopes from coming out creased on your Sharp Printer, check if the fusing unit levers are properly set. Lower the fusing unit levers.
How to collate photocopied pages on my Sharp DX-C200?
To collate photocopied pages on your Sharp Printer, change the [Sort] setting under copy settings on the control panel.
Why is the photocopied paper blank on my Sharp Printer?
If the photocopied paper is blank on your Sharp Printer, the original might not be set correctly. When using the exposure glass, place originals copy side down. When using the ADF, place them copy side up.
Why is the wrong original being copied on my Sharp DX-C200?
If the wrong original was copied on your Sharp Printer, and you are copying from the exposure glass, make sure that there are no originals in the ADF.
How do I make copied pages look like the originals on my Sharp DX-C200?
To make copied pages look the same as the originals on your Sharp Printer, select the correct scan mode according to the type of original.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Technology | Laser |
| Print Speed | 20 ppm |
| Print Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed | 20 cpm |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Scanner Type | Flatbed |
| Paper Size | A4 |
To Next Page
