2-35
COPIERâ–ºBASIC PROCEDURE FOR MAKING COPIES
MAKING COPIES USING THE BYPASS TRAY
MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special
media.
For detailed information on paper that can be loaded into the bypass tray, see "APPLICABLE PAPER TYPES (page 1-62)".
For precautions on loading paper into the bypass tray, see "LOADING PAPER INTO THE BYPASS TRAY (page 1-69)
".
1
Load paper into the bypass tray.
â–º LOADING PAPER INTO THE BYPASS TRAY (page 1-69)
When you load paper in the bypass tray, the current bypass tray paper type and size appear. To change the
paper type or size, tap the [Change] key.
For the settings, refer to
"SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY (page 2-36)".
If paper is already loaded in the bypass tray and you want to change the tray to be used to the bypass tray,
go to step 2.
2
Tap the [Paper Select] key, and tap the bypass tray key.
The bypass tray key shows the previously loaded paper size and type.
If the paper type and size are okay, go to the next step.
If you need to change the paper type or size setting to match the paper placed in the bypass tray, change as explained
in "SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY (page 2-36)
".
â–º SELECTING THE PAPER TRAY FOR COPYING (page 2-12)
3
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
â–º AUTOMATIC DOCUMENT FEEDER (page 1-75)
â–º DOCUMENT GLASS (page 1-77)
4
Tap the [Start] key to start copying.
Easy
Copy
Current Bypass Tray Settings
are as follows.
Type:
Tap [Change] to change current paper
setting and select other paper types.
Change OK
Size: 8½x11
Plain Paper 1
(60 - 79 g/m
2
)
Settings
Volume
To Next Page
Loading...
Need help?
General
