Sharp MX-B355W User Manual

1-80
BEFORE USING THE MACHINE ► STOPPING/DELETING A JOB, PRIORITY PROCESSING AND CHECKING THE STATUS
STOPPING/DELETING A JOB IN PROGRESS
OR RESERVED
1
Tap the job status display and tap the tab for the job that you wish to stop or
delete.
2
Tap the [Job Queue] key.
When you wish to stop a print job being sent from the computer, tap the [Spool] key.
3
Tap the job that you wish to stop or delete, and then tap [Stop/Delete] on the
action panel.
When a screen appears that allows you to confirm that you do want to stop the job, tap the [Cancel] key.
If the machine runs out of paper during a copy or print job, you can cancel the job from the job status screen.
To delete more than one job, operate the check box for [Enter Multi Selection Mode] on the action panel so that it looks
like .
• Printing of a received fax or Internet fax cannot be stopped.
• A job set for transfer in "FORWARDING RECEIVED DATA TO PRESET DESTINATIONS (INBOUND ROUTING
SETTINGS) (page 4-60)" cannot be canceled.
Job Queue
Complete
Internet FaxFaxScan
Job
Address
Set Time
Status
Print Image Sending
Activity Report
Back
0000/0002 OK
0000/000110:45 07/07
Broadcast004
Pages
Print

Sharp MX-B355W Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Scan Resolution	600 x 600 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Paper Capacity	550 sheets
ADF Capacity	50 sheets
Max Paper Size	A4
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, macOS, Linux
Paper Size	A4, A5, A6, B5, Letter, Legal
Fax Transmission Speed	33.6 kbps
Print Resolution	Up to 1200 x 1200 dpi