7-106
SYSTEM SETTINGSâ–ºSYSTEM SETTINGS
Server Settings
Receive Settings
Internet Fax Receive
Set whether or not Internet Fax reception is performed.
POP3 Server
Enter a maximum of 127 half-width characters for the name of the POP3 server to be used.
Port Number
Specify the port number of the POP3 server to be used.
POP Authentication
Set to use POP authentication.
User Name
Enter a maximum of 64 characters for the user name used to access the server.
Password
Enter a maximum of 32 characters for the password used to access the server.
POP3 Communication Timeout
Set a timeout for communication to the POP3 server.
Reception Check Interval Setting
Enter an acknowledge cycle to the POP3 server.
Enable SSL
Use SSL to encrypt data before transmission.
Default Settings
Own Number and Name Set
Set I-Fax Own Name
Enter a maximum of 20 full-width/half-width characters for the sender name for Internet Fax transmission.
Source Address
Enter a maximum of 56 half-width characters for the sender address for Internet Fax transmission.
Direct SMTP Setting
Port Number (Receive), Port Number (Send)
Specify the port number used for transmission and reception by direct SMTP.
Timeout
Set the wait time until transmission or reception is canceled when a response is not received from the server during
direct SMTP transmission/reception.
To Next Page
Loading...
Need help?
General
