Sharp MX-B355W User Manual

4-112
FACSIMILE►USING AN EXTERNAL TELEPHONE
CONNECTING AN EXTERNAL TELEPHONE
CONNECTING AN EXTENSION TELEPHONE
You can connect an existing telephone to the machine.
The telephone can be used for voice calls and to start fax reception on the machine. Connect the extension telephone as shown
below. After connecting an extension telephone, configure the "External Telephone Setting" in setting mode (administrator).
USING AN EXTERNAL TELEPHONE
Enable the "Tel/Fax Auto Change" function. This is useful as the telephone or fax operation is selected automatically
according to the calling.
• You cannot send a fax from your telephone.
• You can connect a telephone with a modular cable plug to your machine. Also, use the two-wire cable for telephone
connection. If another type of cable is used, the telephone may not operate normally.
• If the plug on the telephone line cord does not fit into the jack on your extension phone, contact your dealer or nearest
SHARP Service Department.
Extension telephone jack
Click!
Existing extension telephone (example)
Click!

Sharp MX-B355W Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Scan Resolution	600 x 600 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Paper Capacity	550 sheets
ADF Capacity	50 sheets
Max Paper Size	A4
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, macOS, Linux
Paper Size	A4, A5, A6, B5, Letter, Legal
Fax Transmission Speed	33.6 kbps
Print Resolution	Up to 1200 x 1200 dpi