2-108
COPIERâ–ºCONVENIENT COPY FUNCTIONS
INTERRUPT COPY
This function suspends a job in progress, and preferentially prints the original specified with interrupt copy.
When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy.
CONVENIENT COPY FUNCTIONS
• The [Interrupt] key does not appear while an original is being scanned.
• Depending on the settings of the job in progress, the [Interrupt] key may not appear.
• Interrupt copy cannot be used in combination with the following functions:
Job Build, Card Shot, Original Count, Proof Copy, Preview Setting.
• If you use the document glass for interrupt copy, you cannot select the booklet, covers/inserts function, or N-Up setting.
If any of these functions are necessary, use the automatic document feeder.
1
Tap the [Interrupt] key.
The interrupt mode screen appears.
If user authentication is specified:
Tap the [Interrupt] key to display the user authentication screen. Enter the login name and password to perform user
authentication.
2
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
â–º AUTOMATIC DOCUMENT FEEDER (page 1-75)
â–º DOCUMENT GLASS (page 1-77)
3
Configure copy settings.
To cancel interrupt copy, tap the [Cancel] key.
8½x11
8½x11
8½x11
8½x11
8½x11
Copy Interrupt
LINE PRINTER
Cancel
Print
Job Status
Tray 1
8½x11
To Next Page
Loading...
Need help?
General
