2-64
COPIERâ–ºOTHER FUNCTIONS
DISPLAYING ECO RECOMMENDATION SETTINGS
(ECO RECOMMENDATION FUNCTION DISPLAY)
When the base screen of normal mode is displayed, eco recommendation settings appear.
The displayed functions are as follows.
•2-Sided Copy ►page 2-16
•N-Up ►page 2-41
• Image Orientation ►page 2-29
3
Tap the [Start] key.
4
Check the number of original sheets.
The number that is displayed is the number of scanned
original sheets, not the number of scanned original pages.
For example, when 2-sided copying is performed using one
original, the number "1" will appear to indicate that one
original sheet was scanned, not "2" to indicate the front-side
page and the reverse side page.
If the displayed number of original sheets is different from the actual number of sheets
Tap the [Cancel] key to stop the job.
5
Tap the [OK] key to start copying.
If this function is combined with [Job Build], the count result is displayed after the [Read-End] key has been tapped.
This function does not operate in easy mode.
To use the eco recommendation function display:
"Settings (administrator)" → [System Settings] → [Energy Save] → [Eco Setting] → [Eco Recommendation Function
Display].
Start
Program Registration
Call Eco Program
8½x11
Register Current Settings
8½x11
8½x11
8½x11
8½x11
Cancel OK
1 pages of original
have been scanned.
Copy the scanned data?
To Next Page
Loading...
Need help?
General
