Sharp MX-B355W User Manual

1-103
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
INNER FINISHER
This device outputs sorted paper while staggering each set of paper. As needed, it staples each set.
PART NAMES
The following describes the parts that appear when the finisher is open.
(1) Output tray
Stapled and offset output is delivered to this tray.
The tray is slidable. To print on large paper, extend the
tray.
(2) Front cover
Open this cover to remove a paper misfeed, replace
staples, or remove a staple jam.
(3) Staple case
This holds the staple cartridge.
Pull the case out to replace the staple cartridge, or
remove a staple jam.
(4) Staple case release lever
Use this lever to remove the staple case.
(5) Lever
Use this lever to move the finisher.
(1) (4) (3)
(2) (5)
Exercise caution when you turn on the power and when printing take place, as the output tray may move up and down.

Sharp MX-B355W Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Scan Resolution	600 x 600 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Paper Capacity	550 sheets
ADF Capacity	50 sheets
Max Paper Size	A4
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, macOS, Linux
Paper Size	A4, A5, A6, B5, Letter, Legal
Fax Transmission Speed	33.6 kbps
Print Resolution	Up to 1200 x 1200 dpi