Sharp MX-B355W User Manual

4-37
FACSIMILE►BASIC TRANSMISSION METHODS
RESENDING TO UNSUCCESSFUL BROADCAST
TRANSMISSION DESTINATIONS
The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the
destinations failed, resend the fax to those destinations.
5
Tap the [Start] key to start scanning of the original.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat the procedure until all pages have been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED (page 4-27)
".
1
Tap the job status display, and tapping
the [Fax] tab.
2
Tap the [Complete] key.
Job Queue
Complete
Internet FaxFaxScan
Job
Address
Set Time
StatusPages
Print
Check Details of
Selected Job
Stop/Delete
Enter Multi
Selection Mode
Display Only
Own Job
Check Confidential
Reception Data
Back
Waiting
000110:45 07/07Broadcast

Sharp MX-B355W Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Scan Resolution	600 x 600 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Paper Capacity	550 sheets
ADF Capacity	50 sheets
Max Paper Size	A4
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, macOS, Linux
Paper Size	A4, A5, A6, B5, Letter, Legal
Fax Transmission Speed	33.6 kbps
Print Resolution	Up to 1200 x 1200 dpi