Sharp MX-B355W User Manual

5-50
SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE
SPECIFYING THE ORIGINAL SCAN SIZE USING
NUMERIC VALUES
When scanning a non-standard size original such as a card or postcard, specify the original size using numeric values
after placing the original.
The width can be from 1" to 14" (25 mm to 356 mm), and the height can be from 1" to 8-1/2" (25 mm to 216 mm).
When the scan size is specified by numeric values, the send size cannot be specified.
1
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 5-10)
2
Tap the [Original] key.
3
After tapping the "Scan Size" key, tap the [Direct Entry] key.
4
Specify the original size.
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• It is convenient to use to finely adjust the entered size.
5
Tap the [Execute] key.
After the settings are completed, tap twice.
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:
Tap the [Auto] key.
8½ x 11
14

Sharp MX-B355W Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Scan Resolution	600 x 600 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Paper Capacity	550 sheets
ADF Capacity	50 sheets
Max Paper Size	A4
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, macOS, Linux
Paper Size	A4, A5, A6, B5, Letter, Legal
Fax Transmission Speed	33.6 kbps
Print Resolution	Up to 1200 x 1200 dpi