5-108
SCANNER/INTERNET FAXâ–ºOTHER FUNCTIONS
CHECKING THE NUMBER OF SCANNED ORIGINAL
SHEETS BEFORE TRANSMISSION (ORIGINAL COUNT)
Count the number of scanned original sheets and display the count before transmission.
Checking the number of scanned original sheets before transmission helps prevent transmission mistakes.
• The count result is displayed with the number of scanned original sheets, not the number of scanned original pages. For
example, when a 2-sided original is transmitted, the number "1" will appear to indicate that one original sheet is
transmitted, not "2" to indicate the front-side page and the reverse side page.
• When a broadcast transmission is performed, if the original count function is selected in any of the modes, the function will
operate for all destinations.
• The setting should be enabled separately for each mode.
1
Place originals in the automatic document feeder.
â–º AUTOMATIC DOCUMENT FEEDER (page 1-75)
2
Tap the mode display to switch to the initial screen of each mode.
â–º Changing mode from each mode (page 5-10)
3
Specify the destination.
â–º RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-15)
â–º VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-18)
â–º USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-19)
â–º ENTERING AN ADDRESS MANUALLY (page 5-20)
â–º SPECIFYING A NETWORK FOLDER (page 5-21)
â–º RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-22)
â–º USING A TRANSMISSION LOG TO RESEND (page 5-24)
4
Tap the [Others] key, and tap the
[Original Count] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To cancel the original count setting:
Tap the [Original Count] key to uncheck it.
Preview
Start
To Next Page
Loading...
Need help?
General
