Sharp MX-M7570 User Manual

1-8
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
SIDE AND BACK
(1) USB connector (A type)
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
(2) USB connector (B type)
This machine does not use this connector.
(3) LAN connector
Connect the LAN cable to this connector when the
machine is used on a network.
Use a shielded LAN cable.
(4) Service-only connector
(5) Extension phone jack (TEL)*
When the fax function of the machine is used, an
extension phone can be connected to this jack.
(6) Telephone line jack (LINE)*
When the fax function of the machine is used, the
telephone line is connected to this jack.
(7) Power plug
* Optional
(1)
(2)
(3)
(4)
(7)
(6)
(5)
This connector is for use only by service technicians.
Connecting a cable to this connector may cause the
machine to malfunction.
Important note for service technicians:
The cable connected to the service connector must be
less than 118" (3 m) in length.

Sharp MX-M7570 Specifications

General

Print Technology	Laser
Print Speed	75 ppm
Max Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Scan Resolution	600 x 600 dpi
Copy Speed	75 cpm
Max Copy Resolution	600 x 600 dpi
Fax Capability	Optional
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A3
Network Connectivity	Yes
Scanner Type	Color Flatbed Scanner with Duplex Single Pass Feeder (DSPF)
Functions	Print, Copy, Scan
Original Size	A3
Connectivity	USB 2.0, Ethernet
Operating System Compatibility	Windows, Mac