3-26
PRINTER►CONVENIENT PRINTING FUNCTIONS
CONVENIENT FUNCTIONS FOR CREATING
PAMPHLETS AND POSTERS
CREATE A PAMPHLET (BOOKLET/SADDLE STITCH)
The pamphlet function prints on the front and back of each sheet of paper so that the sheets can be folded and bound to
create a pamphlet.
If a saddle finisher is installed and if "Booklet" and "Staple" are selected, this function automatically folds and outputs the
copies. This is convenient when you wish to compile printed output into a pamphlet.
(1) Click the [Layout] tab.
(2) Select [Standard] or [Full Image] in "Booklet".
• When [Standard] is selected, the printed image will be enlarged or reduced to fit the paper selected in "Output Size".
• When [Full Image] is selected, the printed image will be enlarged or reduced to fit the size selected in "Fit To Paper Size".
By
selecting a paper size that is larger than the print image, you can cut off the edges of the paper after making the booklet to create a
booklet with no margins.
•
When the number of output pages will exceed the number of sheets that can be stapled, you can select the [Split] checkbox ( ) to divide the
output into multiple sub-booklets that can each be stapled. When stacked, the sub-booklets will have the same page order as the original pages.
• To select [Full Image], you must first select “Output Size”.
(3) Select the specified output size and the binding edge.
• When [Standard] is selected, select the output paper size.
•
When [Full Image] is selected, select the size to which you want to enlarge or reduce the print image in [Fit To Paper Size], and select
the paper size you want to use for printing in "Output Size".
CONVENIENT PRINTING FUNCTIONS
Windows
To Next Page
Loading...
Need help?
General
