1-199
BEFORE USING THE MACHINEâ–ºPERIPHERAL DEVICES
Sharp OSA
Sharp OSA (Open Systems Architecture) is an architecture that directly links the machine to software applications for
work (external applications) over a network.
When you use a machine that supports Sharp OSA, you can link controls on the operation panel and device functions
such as scan send to external applications.
APPLICATION COMMUNICATION
This module enables you to link the machine with a scanner application and other standard applications. Set a standard
application in "Settings (administrator)" and "Sharp OSA".
To set a standard application in "Settings (administrator)":
In "Settings (administrator)", select [System Settings] → [Sharp OSA Settings] → [Standard Application Settings].
1
Tap the [Sharp OSA] key in the Home
screen.
If no standard applications have been stored, the key cannot
be tapped.
2
Select a standard application.
If two or more standard applications have been stored, the
screen for selecting a standard application will appear. Tap
the standard application that you wish to use.
If only one standard application has been stored, connection
to the standard application will begin.
3
Connect the machine to the standard application.
The message "Connecting to the external application." appears while the machine communicates with the standard
application.
10:15 AM10:15 AM
Easy
Copy
Easy
Scan
Print Release Sharp OSA
LINE PRINTER
Easy
Copy
Easy
Scan
HDD
File retrieve
Sharp OSA
Job Status
Operation
Guide
Enlarge
Display Mode
Settings Total Count LCD Control
Toner Quantity Bk
Select External Application
CLOUD PORTAL
Exit
Mynumber_top_new
To Next Page
Loading...
Need help?
General
