Sharp MX-M7570 User Manual

2-28
COPIER►BASIC PROCEDURE FOR MAKING COPIES
SELECTING THE ORIENTATION AND SIZE
OF THE ORIGINAL
When the original size is a non-standard size or is not detected correctly, manually specify the original size.
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
Specifying the orientation of the original
By specifying the starting side (top or left side) of the placed original, the orientation of the original will be correctly
recognized.
Finishing position settings and N-Up layout settings are specified using the recognized orientation.
Specify the orientation and size of the original
• Set the orientation and size of the original before scanning the original.
• The original size is set in normal mode.
1
Tap the [Original] key to set the orientation of the original.
► COPY MODE (page 2-3)
2
If you want to specify the size, tap the [Detail] key and change to normal
mode.
► CHANGING MODES (page 1-19)
3
Tap the [Original] key.
4
Tap the [AB] tab or the [Inch] tab.
CA
Preview
Copies
Original
Image
Orientation
Start
1
Proof Copy
CAPreview
Start
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
Others
1
No. of copies
3
4
11x17
8½x14
8½x11
Original
Auto
Direct Entry
InchAB Custom Size
8½x11
Image Orientation
5 ½x8 ½ 8 ½x11R 11x17
5 ½x8 ½R 8 ½x13
8 ½x11 8 ½x14
8 ½x13
2
/
5
In Easy mode In Normal mode

Sharp MX-M7570 Specifications

General

Print Technology	Laser
Print Speed	75 ppm
Max Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Scan Resolution	600 x 600 dpi
Copy Speed	75 cpm
Max Copy Resolution	600 x 600 dpi
Fax Capability	Optional
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A3
Network Connectivity	Yes
Scanner Type	Color Flatbed Scanner with Duplex Single Pass Feeder (DSPF)
Functions	Print, Copy, Scan
Original Size	A3
Connectivity	USB 2.0, Ethernet
Operating System Compatibility	Windows, Mac