1-163
BEFORE USING THE MACHINEâ–ºPERIPHERAL DEVICES
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional. However, some models include certain peripheral devices as standard
equipment.
(As of February, 2018)
PERIPHERAL DEVICES
Product name Product
number
Description
Large capacity tray MX-LC18 LOADING PAPER IN THE LARGE CAPACITY TRAY (page
1-116)
MX-LC19
Long paper feeding tray MX-LT10 HOW TO PLACE THE LONG PAPER GUIDE (page 1-124)
Exit tray unit MX-TR21 When a finisher is installed, this can be added to the right side of
the machine.
Exit tray cabinet MX-TU15 This enables separation of output locations by mode (copy,
printer, etc.).
Inner finisher MX-FN33 INNER FINISHER (page 1-165)
Finisher MX-FN34 FINISHER (page 1-168)
Finisher (large stacker) MX-FN21 FINISHER (LARGE STACKER) (page 1-172)
Saddle stitch finisher MX-FN35 SADDLE STITCH FINISHER (page 1-177)
Saddle stitch finisher (large stacker) MX-FN22 SADDLE STITCH FINISHER (LARGE STACKER) (page 1-184)
Trimming module MX-TM10 This unit trims the excess portions of saddle-stitched sheets. A
saddle stitch finisher (large stacker) is required.
Folding unit MX-FD10 This unit folds and outputs paper. A finisher (large stacker) or
saddle stitch finisher (large stacker) is required.
Inserter MX-CF11 This unit inserts covers and insertion sheets. This unit can also
feed paper to a finisher (large stacker) or saddle stitch finisher
(large stacker) for finishing.
Curl correction unit MX-RB18 This unit corrects curls in printed paper. This unit is required for
installing a finisher (large stacker), saddle stitch finisher (large
stacker), folding unit or inserter.
Paper pass unit MX-RB26 This unit is required to install a finisher or a saddle stitch finisher.
MX-RB24
Relay unit MX-RB13 This unit is required for directly installing a finisher (large stacker)
or saddle stitch finisher (large stacker) and inserter.
Punch module
MX-PN16B This unit punches holes in copies and other output. A finisher
(MX-FN34/MX-FN35) is required.
MX-PN13B This unit punches holes in copies and other output. A finisher
(large stacker) or saddle stitch finisher (large stacker)
(MX-FN21/MX-FN22) is required.
To Next Page
Loading...
Need help?
General
