1-206
BEFORE USING THE MACHINEâ–ºMAINTENANCE
This section explains how to clean the machine, replace the toner cartridge, the waste toner box, and the stamp
cartridge.
REGULAR MAINTENANCE
To ensure that the machine continues to provide top quality performance, periodically clean the machine.
CLEANING THE DOCUMENT GLASS AND AUTOMATIC
DOCUMENT FEEDER
If the document glass or document backplate sheet becomes dirty, the dirt will appear as dirty spots, colored lines, or
white lines in the scanned image. Keep these parts clean at all times.
Wipe the parts with a clean, soft cloth.
If necessary, moisten the cloth with water or a small amount of neutral detergent. After that, wipe with a clean dry cloth.
Examples of lines in the image
Document glass Document backplate sheet
MAINTENANCE
Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical
components or the fusing unit inside the machine, fire or electrical shock may result.
• Do not use thinner, benzene, or similar volatile cleaning agents to
clean the machine. These may degrade or discolor the housing.3
• Use a soft cloth to gently wipe off dirt from the area on the operation
panel with a mirror-like finish (shown at right). If you use a stiff cloth or
rub hard, the surface may be damaged.
• The area with a mirror-like finish is the area that is
.
1
To Next Page
Loading...
Need help?
General
