Name: Sharp MX-M7570
Brand: Sharp
Rating: 4 (1 reviews)

To Next Page

To Previous Page

4-53

FACSIMILE►FAX RECEPTION

RECEIVING A FAX MANUALLY

A fax can be received manually using the touch panel (manually).

• When answering the telephone by tapping the [Speaker] key, you will be able to hear the voice of the caller, but you will not

be able to speak.

• You can receive a fax after answering a call on an extension telephone. Remote reception can also be used to receive a

fax.

► RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION TELEPHONE (REMOTE RECEPTION)

(page 4-122)

To switch between auto reception and manual reception modes:

Select [System Settings] in "Settings (administrator)" → [Image Send Settings] → [Fax Data Receive/Forward (Manual)] →

[Fax Settings] → [Receive Settings].

When the machine rings, tap the [Detail] key to change to normal mode, and

tap the [Speaker] key.

When the [Speaker] key is tapped, the [Receive] and appears.

► CHANGING MODES

(page 1-19)

• To adjust the speaker volume, tap the key and adjust with the slider or keys.

• If the received fax data remains unprinted, it will cause the fax memory to fill up, which may prevent some faxes from

being received. When using this function, you should print the received data as soon as possible without leaving it in

the fax memory.

You can view the remaining fax memory capacity on the fax mode base screen.

Tap the [Receive] key to receive a fax.

When printing ends, the Data Notification indicator turns off.

When the job separator (upper tray) is used for output, this

blinks until the output is removed.

Exposure

Original

Resolution

Job Build

Original Count

Slow Scan Mode

Others

Address Fax Number

Sending History

Call Search Number

Call Program

Call Registered settings

Direct TX

Verification Stamp

Send Same Image

as Fax Address

Scan Size

Auto Auto

reception memory

100%

Send Size

Speaker

Start

Address Book

Preview

Mixed Size Orig.

Auto

Super Fine

8½x11 8½x11