2-9
COPIER►BEFORE USING THE MACHINE AS A COPIER
CHECKING THE ORIGINAL SIZE
Easy mode
The size of the placed original is displayed in the upper left corner of the screen.
When you place the original in the automatic document feeder, the original icon appears next to the original size.
Normal mode
Check the size of the placed original on the display of the [Original] key.
If the original size is set to [Auto], the automatically detected size (standard size) is displayed. If the original size is
specified manually, the specified original size is displayed.
When you place the original in the automatic document feeder, the original icon appears above the automatic document
feeder.
Standard sizes
Standard sizes are sizes that the machine can automatically detect.
To specify the standard size, select [System Settings] in "Settings (administrator)"→ [Common Settings] → [Device
Control] → [Original Size Detector Setting].
For standard sizes that can be detected, refer to
Original Size Detector Setting (page 1-129).
• Even when [Original] is set to [Auto], some original sizes may be detected as other one that is near the standard size.
In this case, manually set the original size.
► SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL
(page 2-28)
• When placing a non-standard size original on the document glass, you can make it easier for the size to be detected by
placing a blank sheet of 8-1/2" x 11" (A4), 5-1/2" x 8-1/2" (B5), or other standard size of paper on top of the original.
Original
Detail
Staple / PunchCopy Ratio2-Sided Copy
Paper
Select
8½x11
Tray 1 1 → 1
100% Off
Preview
Copies
CA
Start
1
8½x11
Others
Send and Print
Call Eco Program
Store Data in Folder
File
Store Data Temporarily
Quick File
1
No. of copies
Proof Copy
CAPreview
Start
Paper Select
Auto
Exposure
Auto
Original
Auto 8½x11
2-Sided Copy
1-Sided→1-Sided
Copy Ratio
100%
Output
N-Up
Off
Plain 1
8½x11
8½x11
8½x14
11x17
21
3
4
8½x11
5
8½x11
No. of copies
To Next Page
Loading...
