4-55
FACSIMILEâ–ºFAX RECEPTION
A3 RX Reduce
When an A3 size fax is received, this function reduces the fax to ledger (11" x 17") size.
Fax Output Settings
These settings are used to select the number of copies and output tray for received faxes. When a finisher is
installed, the finisher tray can be selected as the output tray and stapling can be selected.
Output Tray
Select the output tray for received faxes.
Number of Prints
Set the number of copies of received faxes that are printed to any number from 1 to 99.
Staple Settings
When a finisher is installed, set the position at which received faxes are stapled.
Paper Size
When a finisher is installed, select the paper used for printing of received faxes.
Fold Size Setting
When a folding unit is installed, set the paper size to be Z-Folded when received faxes are printed.
Allow/Reject Number Setting
Use this setting to specify whether reception from a stored number is to be allowed or rejected.
Reject hidden Number
Rejects a call if the caller has blocked the sending of caller identification information.
When this setting is enabled, ledger (11" x 17") size faxes are also reduced.
This setting can only be used when the [Multiple Set Print] and [Staple] checkboxes are selected
.
The maximum number of sheets that can be stapled is 50. (When the paper is oriented horizontally, the maximum number of
sheets that can be stapled is 30.)
Item Settings
Rejected Reject reception from the stored number.
Allow Reception Allow reception from the stored number.
All Invalid
Even if numbers have been stored, disregard the numbers and allow reception from all
numbers.
Add New
Adds a new address or domain (maximum of 50) from which reception is to be rejected or
allowed.
Enter the number (maximum of 20 digits) and tap the [Store] key.
Registration Number List
A list of the stored numbers can be displayed.
When you select a number from this screen, it is deleted from the list.
Reject hidden Number
If checked, any call from the number of Reject Unknown Calls setting is rejected,
regardless of the certain number receive settings.
When there are no stored anti junk mail addresses or domains, only the [Add New] key can be selected.
To Next Page
Loading...
Need help?
General
