Sharp SD-AT50 - Page 12

Reference page
Reference page
1. Speaker
2. Speaker Terminals 12
3. Mounting Holes for Stand or Bracket (Optionally available) 16
1.
Subwoofer
2. Bass Reflex Duct
3. System Connection Jack (to AV control unit) 11
4. Speaker Terminals 12
5. System Connection Jack (to AV control unit) 11
6. AC Power Input Jack 18
7. Cord Holder 12
Using
antislip speaker cushions:
You can install satellite speakers either vertically or horizontally.
Affix the cushions (supplied) to the bottom of the speakers to prevent them from slid-
ing or falling due to vibration.
(Vertical position) (Horizontal position)
II Satellite speaker x 5
Front speaker x 2: magnetically shielded
Center speaker
x 1: magnetically shielded
Surround speaker x 2: magnetically shielded
II Subwoofer/amplifier unit
A sheet of speaker cushions (20 pes.) is supplied with this product. Use 4 cushions
per speaker.
Bottom
Back
Side
Front
lSJO
Controls and indicators (continued)
SD-AT50
DX-AT50
E-7